G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Fog/Driving Lamp: Adjustments
Description
FRONT FOG LAMP AIMING ADJUSTMENT
Description
PREPARATION BEFORE ADJUSTING
NOTE:
-
For details, refer to the regulations in your own country.
-
Perform aiming if the vehicle front body has been repaired and/or the headlamp assembly has been replaced.
Before performing aiming adjustment, check the following.
-
Adjust the tire pressure to the specification.
-
Fill with fuel, engine coolant and each oil.
-
Maintain the unloaded vehicle condition. (Remove luggage from the passenger compartment and the trunk room.)
NOTE:
Do not remove the temporary tire, jack and on-vehicle tool.
-
Wipe out dirt on the headlamp.
CAUTION:
Never use organic solvent (thinner, gasoline etc.)
-
Ride alone on the driver seat.
AIMING ADJUSTMENT SCREW
NOTE:
The figure is the vehicle without AFS. Each adjustment screw is applied to the vehicle with AFS.
With AFS