G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Headlamp Alignment Sensor: Service and Repair
Removal and Installation
HEIGHT SENSOR
Removal and Installation
REMOVAL
1. Remove the height sensor mounting nut.
2. Remove the height sensor lever link bracket mounting bolt.
3. Disconnect the height sensor connector.
4. Disconnect the height sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Perform the levelizer adjustment when removing the height sensor. Refer to See: Testing and Inspection/Programming and Relearning/Additional
Service When Replacing Control Unit/Description See: Testing and Inspection/Programming and Relearning/Additional Service When Replacing
Control Unit/Special Repair Requirement See: Testing and Inspection/Programming and Relearning/Levelizer Adjustment/Description See: Testing
and Inspection/Programming and Relearning/Levelizer Adjustment/Special Repair Requirement