infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Front Final Drive F160A|Page 1222 > < Front Final Drive F160A|Page 1220
Page 1
background image

Fluid - Differential: Service and Repair
Rear Final Drive R200V

Inspection

REAR DIFFERENTIAL GEAR OIL

Inspection

OIL LEAKAGE
-

Make sure that oil is not leaking from final drive assembly or around it.

OIL LEVEL
-

Remove filler plug (1) and check oil level from filler plug mounting hole as shown in the figure.

CAUTION:
Never start engine while checking oil level.
-

Set a gasket on filler plug (1) and install it on final drive assembly. Refer to See: Transmission and Drivetrain/Differential Assembly/Service and
Repair/Overhaul/Rear Final Drive R200V/M/T/Exploded View (M/T models), See: Transmission and Drivetrain/Differential Assembly/Service
and Repair/Overhaul/Rear Final Drive R200V/A/T/Exploded View (A/T models).

CAUTION:
Never reuse gasket.

Draining

REAR DIFFERENTIAL GEAR OIL

Draining

1. Stop engine.

2. Remove drain plug (1) and drain gear oil.
3. Set a gasket on drain plug (1) and install it to final drive assembly and tighten to the specified torque. Refer to See: Transmission and

Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200V/M/T/Exploded View (M/T models), See: Transmission
and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200V/A/T/Exploded View (A/T models).

CAUTION:
Never reuse gasket.

Refilling

Front Final Drive F160A|Page 1222 > < Front Final Drive F160A|Page 1220