infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

ABOUT US
Cooler Pipe And Hose-Pressure Pipe 1 And High-Pressure Pipe 2 Low-Pressure Pipe 1 And High-Pressure Pipe 2|Page 1147 > < Cooler Pipe And Hose-Pressure Pipe 1 And High-Pressure Pipe 2 Low-Pressure Pipe 1 And High-Pressure Pipe 2|Page 1145

G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)

Page 2
background image

6. Remove vacuum hose. Refer to See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake Booster/Service and Repair/Vacuum

Lines/Exploded View.

7. Remove high-pressure pipe 1.

INSTALLATION
Installation is basically the reverse order of removal.

CAUTION:
-

Replace O-rings with new ones. Then apply compressor oil to them when installing.

-

Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.

-

Insert piping securely until a click is heard.

-

After piping connection is completed, pull male-side piping by hand to check that connection does not come loose.

-

Check for leakages when recharging refrigerant.

Cooler Pipe And Hose-Pressure Pipe 1 And High-Pressure Pipe 2 Low-Pressure Pipe 1 And High-Pressure Pipe 2|Page 1147 > < Cooler Pipe And Hose-Pressure Pipe 1 And High-Pressure Pipe 2 Low-Pressure Pipe 1 And High-Pressure Pipe 2|Page 1145