G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
/Page-266007.png)
-
Insert piping securely until a click is heard.
-
After piping connection is completed, pull male-side piping by hand to check that connection does not come loose.
-
Check for leakages when recharging refrigerant.
Condenser Pipe Assembly
CONDENSER
CONDENSER PIPE ASSEMBLY : Removal and Installation
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove bumper fascia assembly. See: Body and Frame/Bumper/Front Bumper/Service and Repair/Exploded View.
3. Remove air cleaner case (LH) and air duct (LH). Refer to See: Filters/Air Cleaner Housing/Service and Repair/Exploded View.
4. Disconnect one-touch joint between high-pressure flexible hose
(1) and condenser pipe assembly (2) with disconnector (A)
(SST: J-45815).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
5. Disconnect one-touch joints between high-pressure pipe 1 (3) and condenser pipe assembly with disconnector (A) (SST: J-45815).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
6. Remove mounting bolt (A) from condenser pipe assembly (1).
7. Remove mounting bolt (A) from condenser pipe assembly (1).
8. Remove condenser pipe assembly.
