G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
-
Push in tabs (1) and pull out fuel tube (2).
b. Removal of sub fuel level sensor unit:
i.
Remove retainer.
ii. Raise and release sub fuel level sensor unit to remove.
INSTALLATION
Note the following, and install in the reverse order of removal.
Fuel hose
-
When installing fuel hose connector (1), refer to Quick Connector See: Powertrain Management/Fuel Delivery and Air Induction/Service and
Repair
Main and Sub Fuel Level Sensor Unit
-
Face main and sub fuel level sensor units as shown in the figure, and install them with the knock pin (C) on back aligned with pin hole on fuel
tank.
-
Install retainer so that its notch becomes parallel with the notch on fuel tank.