G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Steering Control Module: Removal and Replacement
Exploded View
4WAS FRONT CONTROL UNIT
Exploded View
Removal And Installation
4WAS FRONT CONTROL UNIT
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the instrument driver lower panel. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
3. Disconnect 4WAS front control unit connectors.
CAUTION:
Disconnect 4WAS front control unit connectors 10 minutes after turning the ignition switch OFF.
4. Remove the bolts of 4WAS front control unit.
5. Remove the 4WAS front control unit (1).
INSTALLATION
Note following, and install in the reverse order of removal.