G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Starter Motor: Service and Repair
Removal and Installation
STARTER MOTOR
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Remove engine undercover, using power tools.
3. Remove road wheel and tire (Front LH), using power tools.
4. Disconnect steering lower joint (1), then remove it. Refer to:
See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and Replacement/Lower Shaft/Without 4WAS/Exploded View
(Without 4WAS)
See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and Replacement/Lower Shaft/With 4WAS/Exploded View (With
4WAS).
5. Remove engine mounting insulator (LH) mounting nut (Lower). Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Exploded View
6. Jack up the engine front side to create clearance for removing starter motor.
7. Remove "B" terminal nut (A).
8. Disconnect "S" connector (A).
9. Remove starter motor mounting bolts (B), using power tools.