G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
7. Apply electrical tape to the Posi-Tap(R) and Brown wire as shown in Figure 3.
a). Secure the brown wire to the side of the Posi-Tap® with electrical tape ( 2 revolutions).
b). Secure the Red wire with electrical tape as shown ( 2 revolutions).
8. Connect the negative battery cable.
9. Reset the clock and the radio station presets.
10. Refer to the Service Manual for the following "reset / relearn" procedures:
^ Power Window Initialization
^ ATC Temperature Setting Trimmer (A/C system)
^ ATC Foot Position Setting Trimmer (A/C system)
^ ATC Inlet Port Memory Function (A/C system)
^ Rear View Monitor Possible Route Line Center Position Adjustment (if equipped)
11. Inform the customer they will need to "reset" their Automatic Drive Positioner.
Posi-Tap(R) Use
1. Tap vehicle wire.
a). Remove cap (slot side) from tap body.
b). Slide cap around vehicle wire.