G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Never damage gear carrier.
INSTALLATION
1. Apply multi-purpose grease to sealing lips of side oil seal.
2. Using the drift (A) [SST: ST33400001 (J-26082)], press-fit side oil seal so that its surface comes face-to-face with the end surface of the side
retainer.
CAUTION:
-
Never reuse oil seal.
-
When installing, never incline oil seal.
3. Install the front drive shaft. Refer to See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Overhaul/Front Drive
Shaft/Exploded View.
4. When oil leaks while removing, check oil level after the installation. Refer to See: Fluid - Differential/Service and Repair/Front Final Drive
F160A/Inspection.
Exploded View
SIDE OIL SEAL
LEFT SIDE : Exploded View
Removal And Installation
SIDE OIL SEAL
LEFT SIDE : Removal and Installation