G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Seat Memory Switch: Service and Repair
Removal and Replacement
SEAT MEMORY SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Disconnect battery negative terminal.
2. Remove the front door finisher (1). Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Removal and Installation.
3. Press pawls and remove seat memory switch (2) from front door finisher (1).
triangle : Pawl
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to See: Testing and
Inspection/Programming and Relearning/Additional Service When Replacing Control Unit/Special Repair Requirement.