G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Front Bumper: Service and Repair
Removal and Installation
FRONT BUMPER
Removal and Installation
REMOVAL
CAUTION:
Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with oil.
1. Fully open hood assembly.
2. Remove clips (A) of front bumper fascia upper side.
3. Remove radiator core support ornament. Refer to See: Radiator Support/Service and Repair/Removal and Installation.
4. Remove clips (A) of hood seal assembly (side) (LH/RH), and then remove hood seal assembly (1) located front portion. Refer to See:
Fender/Front Fender/Service and Repair/Removal and Installation.
5. Remove bolts (A) of fixing bumper fascia and front fender (LH/RH), using a tool (B).