G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
6. Remove screws (A), located behind the power window finisher.
7. Remove step lamp. Refer to See: Lighting and Horns/Courtesy Lamp/Service and Repair/Step Lamp/Removal and Installation.
8. Insert a remover tool (A) into clips on door finisher (1), and disengage clips.
circle : Clip
CAUTION:
Insert a remover tool into the part shown in the figure
(Between the clip and the body side panel).
9. Pull up door finisher and pull out toward vehicle inside.
-
Disconnect seat memory switch connector (A). (with ADP)
-
Disconnect tweeter connector (B). (with BASE AUDIO)
-
Disconnect front door squawker connector (B). (with BOSE
AUDIO)
10. Disconnect the inside handle cable from front door inside handle assembly. Refer to See: Locks/Door Locks/Service and Repair/Front Door
Lock/Exploded View See: Locks/Door Locks/Service and Repair/Front Door Lock/Removal and Installation, "FRONT
DOOR LOCK : Removal and Installation".
11. Remove door finisher.
12. Remove the following parts after removing door finisher.
-
Front door inside handle assembly. Refer to See: Locks/Door Locks/Service and Repair/Front Door Lock/Exploded View.
-
Rear door inside handle assembly. Refer to See: Locks/Door Locks/Service and Repair/Rear Door Lock/Exploded View.
-
Seat memory switch. (with ADP) Refer to See: Mirrors/Memory Positioning Systems/Seat Memory Switch/Service and Repair/Removal and
Replacement.
-
Tweeter (with BASE AUDIO). Refer to See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and
Repair/Tweeter/Removal and Installation/Base Audio/Without Rear View Camera.
-
Front door squawker.
BOSE AUDIO WITHOUT NAVIGATION: Refer to See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Squawker/Removal and Installation/Without Navigation.
BOSE AUDIO WITH NAVIGATION: Refer to See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and