G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Fuel Door: Service and Repair
Removal and Installation
FUEL FILLER LID OPENER
Removal and Installation
NOTE:
When fuel filler lid opener actuator (1) is a defective operation, pull the rod to open fuel filler lid.
REMOVAL
1. Remove mounting screws, and then remove fuel filler lid.
2. Rotate lock nut counterclockwise, and then remove lock nut.
3. Push fuel filler lid opener actuator behind the vehicle.
4. Remove trunk side finisher (RH). Refer to See: Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Trunk Room
Trim/Removal and Installation.
5. Disconnect harness connector and remove fuel filler lid opener actuator.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.