G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
6. Remove coin pocket fixing pawl using a remover tool (A), and then remove coin pocket (1).
triangle: pawl
7. Insert a deep-well socket wrench (A) to rotate adjusting nut to loosen cable sufficiently. Refer to See: Brakes and Traction Control/Parking Brake
System/Testing and Inspection/Parking Brake System Lever Type.
8. Remove console rear finisher.
-
Pull back the console rear finisher (1).
-
Disconnect inside key antenna connector (A).
square : Metal clip
9. Remove console mask.
-
Open the console lid.
-
Pull up console mask by using a remover tool (C), and disengage pawls.
triangle: pawl