G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Brake Pedal Assy: Service and Repair
Inspection and Adjustment
BRAKE PEDAL
Inspection and Adjustment
INSPECTION
Brake Pedal Height
Check the height (H1) between the dash lower panel (1) and the brake pedal upper surface.
Standard
H1 : Refer to BR-64, "Brake Pedal". See: Specifications
CAUTION:
Remove the floor trim.
ASCD Brake Switch and Stop Lamp Switch
Check the clearance (C1 and C2) among ASCD brake switch (1) threaded end, stop lamp switch (2) threaded end and the stopper rubber (3).
Standard
C1 : Refer to BR-64, "Brake Pedal". See: Specifications
C2 : Refer to BR-64, "Brake Pedal". See: Specifications
CAUTION:
The stop lamp must turn off when the brake pedal is released.
NOTE:
Pull the brake pedal pad to make the clearance between the stop lamp switch threaded end and the stopper rubber. (The stopper rubber hits ASCD
brake switch threaded end.)
Brake Pedal Play