G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
-
VVEL actuator arm (B) is factory-fixed at 5.5 degrees from the small lift with a holding jig (A).
-
The holding jig is supplied in the new VVEL actuator sub assembly.
CAUTION:
-
Never disassemble VVEL actuator sub assembly. [Never loosen actuator motor mounting bolts (A) shown in the figure]
-
Never shock VVEL actuator sub assembly.
a. Move control shaft to the position of small lift stopper.
-
The position where a part of the stopper of control shaft contacts VVEL ladder bracket.
1 : VVEL ladder assembly (bank 2)
2 : VVEL ladder assembly (bank 1)
A : Stopper of control shaft
Black arrow indicates Small lift side
CAUTION:
Be careful not to damage the stopper surface.
-
If control shaft cannot be moved, set crankshaft in position referring to the information below. (To displace cam nose)