G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
11. Loosen mounting nuts in the reverse order as shown in the figure to remove exhaust manifold.
A : Bank 1
B : Bank 2
White arrow : Engine front
NOTE:
Disregard the numerical order No. 7 and 8 in removal.
12. Remove gaskets.
CAUTION:
Cover engine openings to avoid entry of foreign materials.
INSTALLATION
Note the following, and install in the reverse order of removal.
EXHAUST MANIFOLD GASKET
-
Install exhaust manifold gasket in direction shown in the figure.
(Follow the same procedure for both banks.)
A : Bank 1
B : Triangle press
C : Bank 2
White arrow : Engine front
EXHAUST MANIFOLD
-
If stud bolts were removed, install them and tighten to the torque specified below.
Tightening torque : Refer to EM-34, "Exploded View". See: Exploded View