G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Backup Lamp: Service and Repair
Replacement
BACK-UP LAMP
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
-
Never touch bulb by hand while it is lit or right after being turned off.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.
BACK-UP LAMP BULB
1. Remove the trunk lid finisher inner. Refer to .
2. Disconnect the back-up lamp connector.
3. Turn the bulb socket (1) counterclockwise and unlock it.
4. Remove the bulb (2) from the socket.