G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Fluid - Transfer Case: Service and Repair
Draining
TRANSFER FLUID
Draining
1. Run the vehicle to warm up the transfer unit sufficiently.
2. Stop the engine, and remove the drain plug (1) to drain the transfer fluid.
3. Set a new gasket onto the drain plug, and install it on the transfer and tighten to the specified torque. Refer to See: Transmission and
Drivetrain/Transfer Case/Service and Repair/Overhaul/Front Case and Rear Case/Exploded View.
CAUTION:
Never reuse gasket.