infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Engine Controls - Low Battery Voltage/No Start|Page 2241 > < A/T Controls - Shift Issues/Multiple DTC's Set|Page 2236
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - Low Battery Voltage/No Start

Classification: EL09-050C

Reference: ITB10-010C

Date: September 7, 2010

G37; BATTERY LOW VOLTAGE / NO START

This bulletin has been amended. The Applied Vehicles section and Table A has been revised. No other changes have been made. Please discard all
previous copies.

APPLIED VEHICLES: 
2008-2010 G37 Coupe (CV36)
2009-2010 G37 Sedan (V6)
2009-2010 G37 Convertible (HV36)

IF YOU CONFIRM

An Applied Vehicle has a battery low voltage or "no start condition" due to a specific customer use pattern (see Repair Overview flowchart").

NOTE:

A battery low voltage condition may cause an engine no crank or no start condition.

ACTIONS

1. Confirm this bulletin applies (see Repair Overview flowchart).

NOTE:

If the customer use pattern DOES NOT MATCH the description in the Repair Overview this bulletin DOES NOT APPLY. Go back to ASIST for further
diagnostic and repair information.

2. If this bulletin applies use the Repair Overview flowchart to determine which repair procedures to apply to your vehicle.

IMPORTANT:

The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Repair Overview
as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

Engine Controls - Low Battery Voltage/No Start|Page 2241 > < A/T Controls - Shift Issues/Multiple DTC's Set|Page 2236