infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2430 > < Initial Inspection and Diagnostic Overview|Page 2428
Page 62
background image

YES - GO TO 2.
NO - Repair the terminal and connector.
2.CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect the connector of AV control unit.
2. Check the resistance between the AV control unit harness connector terminals.
- Models with navigation system

- Models without navigation system (With rear view monitor)

- Models without navigation system (Without rear view monitor)

Is the measurement value within the specification?
YES - GO TO 3.
NO - Repair the AV control unit branch line.
3.CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the AV control unit. Refer to the following.
-

Base audio without rear view monitor: See: Accessories and Optional Equipment/Testing and Inspection/Component Tests and General
Diagnostics/Power Supply and Ground Circuit/AV Control Unit/Base Audio/Without Rear View Camera

-

Base audio with rear view monitor: See: Accessories and Optional Equipment/Testing and Inspection/Component Tests and General
Diagnostics/Power Supply and Ground Circuit/AV Control Unit/Base Audio/With Rear View Camera

-

BOSE audio without navigation: See: Accessories and Optional Equipment/Testing and Inspection/Component Tests and General
Diagnostics/Power Supply and Ground Circuit/AV Control Unit/Bose Audio/Without Navigation

-

BOSE audio with navigation: See: Accessories and Optional Equipment/Testing and Inspection/Component Tests and General Diagnostics/Power
Supply and Ground Circuit/AV Control Unit/Bose Audio/With Navigation

Is the inspection result normal?
YES (Present error)-Replace the AV control unit. Refer to the following.
-

Base audio without rear view monitor: See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and
Repair/AV Control Unit/Exploded View/Base Audio/Without Rear View Camera

-

Base audio with rear view monitor: See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and
Repair/AV Control Unit/Exploded View/Base Audio/With Rear View Camera

-

BOSE audio without navigation: See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/AV
Control Unit/Exploded View/Bose Audio/Without Navigation

-

BOSE audio with navigation: See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/AV
Control Unit/Exploded View/Bose Audio/With Navigation

YES (Past error)-Error was detected in the AV control unit branch line.
NO - Repair the power supply and the ground circuit.

CAN System (Type 11)

AV BRANCH LINE CIRCUIT

Diagnosis Procedure

1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side).
Is the inspection result normal?
YES - GO TO 2.
NO - Repair the terminal and connector.

Initial Inspection and Diagnostic Overview|Page 2430 > < Initial Inspection and Diagnostic Overview|Page 2428