G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
11. Remove fuel injector (2) from fuel tube (4) as follows:
3 : O-ring
A : Installed condition
B : Clip mounting groove
a. Open and remove clip (1).
b. Remove fuel injector from fuel tube by pulling straight.
CAUTION:
-
Be careful with remaining fuel that may go out from fuel tube.
-
Be careful not to damage injector nozzles during removal.
-
Never bump or drop fuel injector.
-
Never disassemble fuel injector.
12. Remove fuel sub-tube and fuel damper, if necessary.
INSTALLATION
1. Install fuel damper (4) as follows:
2 : Cup
5 : Clip
C : Cut-out
a. Install new O-ring (1) to fuel tube as shown. When handling new
O-ring, pay attention to the following caution items:
CAUTION:
-
Handle O-ring with bare hands. Never wear gloves.
-
Lubricate O-ring with new engine oil.
-
Never clean O-ring with solvent.
-
Check that O-ring and its mating part are free of foreign material.