G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
1. Restart the C-III session by selecting the Home icon in the upper left corner of the screen (see Figure 3).
2. Navigate C-III to the reprogramming screen shown in the Figure 3 example above.
NOTE:
^ Do not use the Reprogramming / Programming selection.
^ Select the Model and Model Year and then navigate to Direct Diagnosis> Reprogramming.
^ TCM initialization is not needed for 7 Speed AT reprogramming.
3. On your C-III screen look for a Transmission Part Number in the Part Number column (see Figure 3 example).
^ If there is no Transmission Part Number listed proceed to step 6.
^ If a Transmission Part Number is listed write it on the Repair Order then proceed to step 4.
4. Compare the P/N you wrote down to the numbers in the Current TCM Part Number column in Table B, above.
^ If there is a match continue with the TCM reprogramming procedure. If there is not a match proceed to step 6.