Infiniti Workshop Service and Repair Manuals

Engine Control Module: Testing and Inspection
Additional Service When Replacing Control Unit (ECM)

Description

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
(ECM) : Description

When replacing ECM, the following procedure must be performed.

Special Repair Requirement

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) : Special Repair Requirement

1.PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
Refer to See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Special Repair
Requirement.
- GO TO 2.
2.PERFORM VIN REGISTRATION
Refer to See: VIN Registration/Special Repair Requirement.
- GO TO 3.
3.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to See: Fuel Delivery and Air Induction/Testing and Inspection/Programming and Relearning/Accelerator Pedal Released Position
Learning/Special Repair Requirement.
- GO TO 4.
4.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/Throttle Valve Closed Position Learning/Special
Repair Requirement.
- GO TO 5.
5.PERFORM IDLE AIR VOLUME LEARNING
Refer to See: Fuel Delivery and Air Induction/Testing and Inspection/Programming and Relearning/Idle Air Volume Learning/Special Repair
Requirement.
- END