G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Removal and Installation
AIR CLEANER AND AIR DUCT
Removal and Installation
REMOVAL
NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1. Disconnect mass air flow sensor harness connector.
2. Disconnect PCV hose.
3. Remove air cleaner case & mass air flow sensor assembly and air duct & air hose by disconnecting their joints.
-
Add marks if necessary for easier installation.
4. Remove mass air flow sensor from air cleaner case, if necessary.
CAUTION:
Handle mass air flow sensor according to the following instructions.
-
Never shock the mass air flow sensor.
-
Never disassemble the mass air flow sensor.
-
Never touch the sensor of the mass air flow sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Align marks. Attach each joint. Screw clamps firmly.