G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
and remove the connector.
-
Install the connector with lock raised, and push lock into the connector.
-
After installing the connector, check that the lock is pushed securely into it.
3. Remove the fixing bolts, and then remove the side curtain air bag module.
CAUTION:
-
Never impact the side curtain air bag module.
-
Replace the side curtain air bag module if it has been dropped or sustained an impact.
· Never insert any foreign objects (screwdriver, etc.) into side curtain air bag module.
· Never disassemble the side curtain air bag module.
Never expose the side curtain air bag module to temperatures exceeding 90°C (194°F).
·
· Never allow oil, grease, detergent, or water to come in contact with the side curtain air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Never damage the harness while installing.
-
If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioning parts, reset the memory using
self-diagnosis or CONSULT-III. Refer to See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Air Bag Warning
Lamp Diagnosis or See: Testing and Inspection/Scan Tool Testing and Procedures.
-
After the work is completed, check that no system malfunction is detected by air bag warning lamp.