G37x Sedan AWD V6-37L (VQ37VHR) Collision Avoidance Sensor Service
Collision Avoidance Sensor: Service and Repair
Removal and Replacement
SONAR SENSOR
Removal and Installation
REMOVAL
1. Remove the rear bumper.
2. Disconnect rear sensor connector.
3. Press the spring fixing the sensor (1) (black arrows).
4. Remove the sensor to the white arrow direction.
2 : rear bumper
INSTALLATION
Install in the reverse order of removal.
CAUTION:
The connector direction is within ±10° from the horizontal position when assembling the bumper.
A : Horizontal position
a : 10°