G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Start / Stop Switch: Service and Repair
Push Button Ignition Switch
PUSH BUTTON IGNITION SWITCH
Removal and Installation
REMOVAL
1. Remove the cluster lid A assembly. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation/A/T Models.
2. Remove the push-button ignition switch (1) from cluster lid A assembly, and then remove pawl (A). Press push-button ignition switch (1) back to
disengage from cluster lid A assembly.
INSTALLATION
Install in the reverse order of removal.