G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Steering Angle Sensor: Service and Repair
Removal and Installation
Base Audio
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable. Refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Exploded View.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
After work, make sure to adjust neutral position of steering angle sensor. Refer to See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment of Steering Angle Sensor Neutral
Position/Description.
-
Perform 4WAS front actuator adjustment. Refer to See: Steering and Suspension/Steering/Testing and Inspection/Programming and
Relearning/4WAS Front Actuator Neutral Position Adjustment/Description, "4WAS FRONT ACTUATOR NEUTRAL POSITION
ADJUSTMENT : Description".
Without Navigation
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable. Refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Exploded View.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
After work, make sure to adjust neutral position of steering angle sensor. Refer to See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment of Steering Angle Sensor Neutral
Position/Description.
-
Perform 4WAS front actuator adjustment. Refer to See: Steering and Suspension/Steering/Testing and Inspection/Programming and
Relearning/4WAS Front Actuator Neutral Position Adjustment/Description, "4WAS FRONT ACTUATOR NEUTRAL POSITION
ADJUSTMENT : Description".
With Navigation
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable. Refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Exploded View.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
After work, make sure to adjust neutral position of steering angle sensor. Refer to See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment of Steering Angle Sensor Neutral
Position/Description.
-
Perform 4WAS front actuator adjustment. Refer to See: Steering and Suspension/Steering/Testing and Inspection/Programming and
Relearning/4WAS Front Actuator Neutral Position Adjustment/Description, "4WAS FRONT ACTUATOR NEUTRAL POSITION
ADJUSTMENT : Description".