G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Steering Column Position Sensor: Testing and Inspection
Diagnosis Procedure
TILT&TELESCOPIC SENSOR
Description
Tilt and telescopic sensor detects the position of steering wheel and transmits signals to automatic drive positioner control unit.
TILT&TELESCOPIC SENSOR
Diagnosis Procedure
1.CHECK TILT AND TELESCOPIC SENSOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect tilt and telescopic sensor and automatic drive positioner control unit connector.
3. Check continuity between tilt and telescopic sensor and automatic drive positioner control unit.
4. Check continuity between tilt and telescopic sensor and ground.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace circuit.
2.CHECK TILT AND TELESCOPIC SENSOR POWER SUPPLY
1. Connect automatic drive positioner control unit connector.
2. Check voltage between automatic drive positioner control unit and ground.
Is the inspection result normal?
YES - GO TO 3.
NO - Replace automatic drive positioner. Refer to See: Accessories and Optional Equipment/Memory Positioning Systems/Memory Positioning
Module/Service and Repair/Automatic Drive Positioner Control Unit.
3.CHECK TILT AND TELESCOPIC SENSOR GROUND
Check continuity between automatic drive positioner control unit and ground.
Is the inspection result normal?