G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Start / Stop Switch: Component Tests and General Diagnostics
Component Function Check
KEY SLOT
Component Function Check
1.CHECK FUNCTION
1. Remove Intelligent Key battery from Intelligent Key.
2. Change power supply position when Intelligent Key insert into key slot and then press push-button ignition switch.
Is the inspection result normal?
YES - Key slot function is normal.
NO - Go to See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General
Diagnostics/Key Slot/Diagnosis Procedure.
Diagnosis Procedure
KEY SLOT
Description
When the Intelligent Key battery is discharged, it performs the NVIS (NATS) ID verification between the integrated transponder and BCM by
inserting the Intelligent Key into the key slot, and then the engine can be started.
KEY SLOT
Diagnosis Procedure
1.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect key slot connector.
3. Check voltage between key slot harness connector and ground.
Is the inspection result normal?
YES - GO TO 2.
NO-1 - Check 10 A fuse [No. 6 and 9 located in the fuse block (J/B)].
NO-2 - Check harness for open or short between key slot and fuse.
2.CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot harness connector and ground.
Is the inspection result normal?
YES - Replace key slot. Refer to See: Service and Repair/Key Slot.
NO - Repair or replace harness.
Component Function Check
KEY SLOT INDICATOR
Component Function Check
1.CHECK FUNCTION