G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
7. Install vane to rotor so that arc of vane faces cam ring side.
8. Check if drive shaft assembly turns smoothly.
9. Install gasket to body assembly.
CAUTION:
Never reuse the gasket.
10. Install rear cover to body assembly.
11. Install bracket to body assembly.
12. Install pulley and washer to drive shaft.
13. Install spring and flow control valve to body assembly.
14. Apply recommended fluid to O-ring, and then install O-ring to connector bolt.
CAUTION:
Never reuse the O-ring.
15. Install connector bolt to body assembly.
16. Install suction pipe to body assembly.