G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
/Page-1106001.png)
Steering Control Module: Service and Repair
4WAS Main Control Unit
Exploded View
4WAS MAIN CONTROL UNIT
Exploded View
Removal and Installation
4WAS MAIN CONTROL UNIT
Removal and Installation
1. Turn the ignition switch OFF.
2. Remove the rear wheel house finisher (LH). Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Trunk Room Trim/Exploded View.
3. Disconnect 4WAS main control unit connectors, 4WAS rear motor relay connector and noise suppressor connectors.
4. Remove the 4WAS main control unit bolts.
5. Remove the 4WAS main control unit (1).
INSTALLATION
Install in the reverse order of removal.
