G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Power Adjustable Steering Column Switch: Service and Repair
TILT&TELESCOPIC SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Disconnect battery negative terminal.
2. Remove the steering column mask (1). Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation/A/T Models.
3. Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).
triangle : Pawl
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to See: Accessories and Optional
Equipment/Memory Positioning Systems/Testing and Inspection/Programming and Relearning/Additional Service When Removing Battery Negative
Terminal/Special Repair Requirement.