G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Removal and Installation
REMOVAL
1. Remove spiral cable assembly. Refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair/Exploded View.
2. Remove steering angle sensor from spiral cable assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
-
After work, make sure to adjust neutral position of steering angle sensor. Refer to See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Programming and Relearning/Adjustment of Steering Angle Sensor Neutral
Position/Description.
-
Perform 4WAS front actuator adjustment. Refer to See: Testing and Inspection/Programming and Relearning/4WAS Front Actuator
Neutral Position Adjustment/Description, "4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT : Description".