G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Removal and Installation
FRONT STABILIZER
Removal and Installation
REMOVAL
1. Remove tires with power tool.
2. Remove under cover with power tool.
3. Remove stabilizer connecting rod.
CAUTION:
Apply a matching mark to identify the installation position.
4. Remove the stabilizer clamp and stabilizer bushing.
5. Remove stabilizer bar.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Check the mounting mark when installing.
-
Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.
Exploded View
REAR STABILIZER
Exploded View