G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
ACTIONS
1. Perform TCM reprogramming.
^ Refer to step 3 under TCM reprogramming in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on.
2. For G37, perform ECM reprogramming - (ECM reprogramming is not needed for G25).
^ Refer to step 3 under ECM reprogramming in the SERVICE PROCEDURE to confirm ECM reprogramming applies and is needed for the vehicle you
are working on.
NOTE:
The ECM reprogramming used for this bulletin is also used for another issue and may have already been performed on your vehicle.
CLAIMS INFORMATION
Service Procedure
SERVICE PROCEDURE
TCM Reprogramming
1. Connect C-III to the vehicle to begin the reprogramming procedure.
^ Make sure to erase DTCs from all systems.
^ TCM initialization is not needed for 7 speed A/T reprogramming.