G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Transmission Cooler: Removal and Replacement
Exploded View
FLUID COOLER SYSTEM
AWD : Exploded View
Removal and Installation
FLUID COOLER SYSTEM
AWD : Removal and Installation
REMOVAL
1. Remove air cleaner case (LH). Refer to See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Exploded View.
2. Remove engine lower cover with a power tool. Refer to See: Body and Frame/Interior Moulding / Trim/Service and Repair/Floor Side
Fairing/Exploded View.
3. Remove A/T fluid cooler hose A and A/T fluid cooler hose B.
4. Remove front propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Front Propeller Shaft/Exploded View.
5. Disconnect heated oxygen sensor 2 connectors (A).
White arrow : Vehicle front
Black arrow : Bolt
6. Remove heated oxygen sensor 2 harness (B) from clips (1).
7. Remove bracket (2) from A/T assembly. Refer to See: Service and Repair/Removal and Replacement/Transmission Assembly/Exploded View,
"AWD
8. Remove front suspension member. Refer to See: Steering and Suspension/Suspension/Service and Repair/Exploded View.