G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
2. Remove the side oil seal using a suitable tool.
CAUTION:
Never damage gear carrier.
INSTALLATION
1. Apply multi-purpose grease to sealing lips of side oil seal.
2. Using the drift (A) [SST: KV38102100 (J-25803-01)], press-fit side oil seal so that its surface comes face-to-face with the end surface of the gear
carrier.
CAUTION:
-
Never reuse oil seal.
-
When installing, never incline oil seal.
3. Install the front final drive assembly on vehicle. Refer to See: Service and Repair/Removal and Replacement/Front Final Drive/Exploded View.
4. When oil leaks while removing, check oil level after the installation. Refer to See: Fluid - Differential/Service and Repair/Front Final Drive
F160A/Inspection.