G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
Fluid - Transfer Case: Service and Repair
Refilling
TRANSFER FLUID
Refilling
1. Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.
Fluid and viscosity : Refer to MA-10, "Fluids and Lubricants". See: Maintenance
Fluid capacity : Refer to DLN-81, "General Specifications". See: Specifications/Mechanical Specifications
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
2. Leave the vehicle for 3 minutes, and check the fluid level again.
3. Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque. Refer to See: Service and Repair/Overhaul/Front
Case and Rear Case/Exploded View.
CAUTION:
Never reuse gasket.