G37x Sedan AWD V6-3.7L (VQ37VHR) (2010)
1. Apply transfer fluid to outside of front oil seal, install it with a drift
(A) [SST: ST27862000 ( -- )] until the end face of front case.
CAUTION:
-
Never reuse front oil seal.
-
Apply petroleum jelly to oil seal lip.
-
When installing, never incline front oil seal.
2. Install front propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Front Propeller Shaft/Exploded View.
3. Fill with new transfer fluid, check fluid level and for fluid leakage. Refer to See: Fluid - Transfer Case/Service and Repair/Inspection.