I30 V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
Wheel Bearing: Service and Repair
Removal and Installation
CAUTION: Before removing the front axle assembly, disconnect the ABS wheel sensor from the assembly. Then, move it away from the front axle
assembly area. Failure to do so may result in damage to the sensor wires and the sensor becoming inoperative.
1. Remove wheel bearing lock nut.
2. Remove brake caliper assembly and rotor. In this case, suspend caliper assembly with wire so as not to stretch brake hose.
CAUTION: Be careful not to depress brake pedal, or piston will pop out. Make sure brake hose is not twisted.