I30 V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
9. Remove O-rings from servo piston retainer.
10. Remove O-rings from band servo piston.
INSPECTION
Pistons, Retainers And Piston Stem
-
Check frictional surfaces for abnormal wear or damage.
Return Springs
-
Check for deformation or damage.
-
Measure free length and outer diameter.
Band Servo:
2nd Servo Return Spring:
Free Length: 32.5 mm (1.280 inch)
Outer Diameter: 25.9 mm (1.020 inch)
O/D Servo Return Spring:
Free Length: 31.0 mm (1.220 inch)
Outer Diameter: 21.7 mm (0.854 inch)
ASSEMBLY
1. Install O-rings to servo piston retainer. Apply ATF to O-rings. Pay attention to position of each O-ring.