I30 V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
3. Remove drive plates, driven plates, retaining plate and dish plate for forward clutch.
4. Remove snap ring for overrun clutch.
5. Remove drive plates, driven plates, retaining plate and dish plate for overrun clutch.
6. Set Tool on spring retainer and remove snap ring from forward clutch drum while compressing return springs. Set Tool directly over return
springs. Do not expand snap ring excessively.
7. Remove spring retainer and return springs. Do not remove return springs from spring retainer.
8. Remove forward clutch piston with overrun clutch piston from forward clutch drum by turning it.
9. Remove overrun clutch piston from forward clutch piston by tarring it.