I35 V6-3.5L (VQ35DE) (2003)
/Page-1223011.png)
15.
Turn the ignition switch "ON" (do not start the engine). Press CONSULT-II's ON button if it does not turn on automatically with the ignition
switch (see Figure 16).
16.
Press "SUB MODE" and select "BATTERY CHARGE".
17.
Refer to Figure 17. The vehicle battery voltage is "Charger Input". "Battery Voltage" is CONSULT-II's battery voltage.
^
If the vehicle battery voltage ("Charger Input") is less than 11 volts, charge it properly/replace it before proceeding with ECM Reprogramming.
^
If CONSULT-II's battery ("Battery Voltage") is less than 8 volts, disconnect CONSULT-II and charge its battery before proceeding with ECM
Reprogramming.
^
If the batteries are within specification, proceed to step 18.
ECM Reprogramming.
18.
Turn the vehicle's ignition switch "OFF" and CONSULT-II off.
