J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Due to limited clearance, this machine cannot be used on the rear rotors of some vehicles. To resolve this issue, two (2) methods of repair are identified
in the illustrated flow chart. Use this chart, as appropriate, when performing brake pad or rotor service.
General Brake Repair Guidelines
GENERAL BRAKE REPAIR GUIDELINES
To properly perform brake repairs, it is important to
observe the following:"
1.
Do not tighten wheel lug nuts with an impact wrench. Uneven or high torque applied to the lug bolts may distort the brake rotor and hub, resulting
in increased rotor run-out.
2.
Prevent contamination, such as rust, dirt, or metal chips between the hub and rotor mating surface. An uneven mating surface between the hub and