J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Heated Oxygen Sensor: Service and Repair
REMOVAL
-
Disconnect harness terminal.
-
Remove sensor with suitable socket or wrench.
Oxygen Sensor
INSTALLATION
-
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do not contaminate sensing tip with compound.
-
Install sensor and torque it to 40 - 50 Nm (30 - 37 lb.ft.).
-
Apply a thin coating of dielectric compound to the connector.
-
Connect harness terminal.