J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Fuel Injector: Service and Repair
1. Release fuel pressure to zero.
2. Drain coolant from radiator drain cock.
3. Remove or disconnect the following:
-
Related harnesses, wires and tubes
-
Intake manifold collector
4. Remove injectors with fuel tube assembly.
5. Remove injectors from fuel tube assembly.
6. Install injectors as follows:
-
Clean exterior of injector tail piece.
-
Use new O-rings.
CAUTION: After properly connecting injectors to fuel tube assembly, check connections for fuel leakage.
7. Assemble injectors with fuel tube assembly to intake manifold.