infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

A/C/Fuel Pump Relay - Diagnosis Precautions|Page 5364 > < Fuel Pump Control Module <--> [Fuel Pump Control Unit]|Specifications|Page 5359
Page 1
background image

Fuel Pump Relay: Technical Service Bulletins
A/C/Fuel Pump Relay - Diagnosis Precautions

Classification:
EC95-005

Reference:
ITB95-042

Date:
July 5, 1995

GREEN OR BLUE (FUEL PUMP & A/C) RELAY CAUTION

SERVICE INFORMATION

When servicing a customer's vehicle, exercise caution when diagnosing / checking the harness at any green or blue colored relay (Fuel pump & A/C)
connector.

SERVICE PROCEDURE

When diagnosing the harness at any green or blue colored relay (Fuel pump & A/C) connector, observe the following pre-cautions to prevent damage to
the Engine Control Module (ECM):

1.

Note that the schematic on the relay is different than the orientation of the relay terminals in the harness connector (see diagram).

2.

Exercise caution to ensure that the correct terminals are being probed at the relay connector during diagnosing / checking.

NOTE

Use a circuit tester first to verify the terminals that are supplied with battery voltage. If battery voltage is connected to terminal 2, the ECM will be
damaged if the circuit being tested has terminal 2 connected to the ECM.

A/C/Fuel Pump Relay - Diagnosis Precautions|Page 5364 > < Fuel Pump Control Module <--> [Fuel Pump Control Unit]|Specifications|Page 5359